IF YOUR HOT WATER SYSTEM SUDDENLY STOPS WORKING: WHAT TO DO

If Your Hot Water System Suddenly Stops Working: What to Do

If Your Hot Water System Suddenly Stops Working: What to Do

Blog Article

Get Started

We've stumbled upon this great article on What Would Cause My Electric Water Heater to Stop Working? listed below on the internet and thought it made good sense to share it with you on this page.



Lots of modern-day residences make use of an electric hot water heater for their heater, because of its comfort as well as ease of use. However, similar to any other electric home appliances, problems might occur with its usage, all of a sudden. It can be truly discouraging to get up to a chilly shower instead of a warm one or having your bathroom with water that isn't hot enough or perhaps as well hot. Whatever the case might be, hot water heater issues can be quite aggravating. Fortunately, we have actually made a list of possible services to your hot water heater issues. There are a number of variables that might trigger a lot of these problems, maybe a problem with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, guarantee you switch off the primary power supply for safety and security. Whatever the problem is, getting it dealt with need to not present way too much of a problem if you follow these actions:

Call A Professional:


If after replacing all malfunctioning parts as well as resetting your temperature, the hot water heater still isn't working, you may require to speak to an expert plumber for an expert opinion. The issue with your heating unit could be that the cold and hot taps have been changed or it may be undersized for the quantity of warm water needed in your house. Whatever the case may be, a specialist plumber would assist solve the issue.

Examine Your Power Supply:


As basic as this might appear, it is extremely essential. Without sufficient power, your hot water heater will certainly not function. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power issue. Examine if the fuse is blown out or the circuit breaker stumbled. If the circuit breaker is the issue, just turn it off and on once again. Replace any type of damaged or damaged fuse. Test the device with power after these changes to see if it's currently functioning.

Check Your Thermostat:


If your water heater still isn't working or the water coming out isn't warm sufficient, you might need to check the temperature settings on your upper thermostat. Make sure the breaker is turned off prior to doing anything. Open the access panel as well as press the red switch for temperature level reset over the thermostat. This must aid heat the water. Turn the circuit breaker back on and check if the issue has been settled.

Examine the Burner in the Water Heater:


If it's not a power problem, then try taking a look at your burner if it is still functioning. Check each of your burner to be sure the problem isn't with any of them. If any of them is defective, replace that part and after that inspect whether the hot water is back on.

Conclusion


Water heater problems are not constantly significant. Many of them are due to small concerns like a blown fuse or damaged burner. Changing the defective parts ought to suffice. Nonetheless, if you are still incapable to fix the issue, give a call to your closest plumber to come to get it repaired.


8 possible reasons why you have no Hot Water


Along with streaming Netflix and having light flood a room when we flick a switch, having hot water flow from our taps and showerheads whenever we want is an oft-overlooked modern miracle of homeownership. That's why, when that flow goes cold, it can be shocking — and not just in a "Wow, that's freezing" kind of way while you're in the shower.


Water Leak


Before hot water reaches your taps and showerheads, it needs to spend some time in your water heater. This appliance, which can be either gas- or electric-powered, takes the cold water that enters your home from your well or utility company and cooks it until it gets hot. It's akin to an electric tea kettle.



Obviously, if your water heater is leaking, it will never fill with water so it won't have anything to warm. To see if this is the case, simply examine the area around the water heater to see if it is wet. If so, you'll likely need to replace the unit, but you can also call in a pro for a second opinion and to see if it is fixable. Sometimes leaks can happen around fixtures on the water heater, and if so, the solution might be as simple as replacing them.


Gas Heater: Gas Leak


If your hot water is fueled by natural gas and there is a leak in the supply line or where the line enters the tank, the appliance won't have the power it needs to heat up your water. The result is not only inconvenient, but it can be extremely dangerous as well. If you smell gas when you investigate your water heater, call your gas utility company immediately and report it as an emergency. It might also be prudent to leave your home until a repair person from the company arrives. Your utility company will usually fix any kind of gas leak. However, in terms of getting your water heater working again, you'll need to relight the pilot and wait a while to see if it is functioning properly. You can call in a water heater specialist or plumber to help with this.


Gas Heater: Pilot Light Problems


There are two other issues with gas-powered water heaters that can lead to a loss of hot water. The first is a pilot light that's blown out. The pilot light is the source of a constant flame inside your water heater. When the heater determines the need to heat up the water it is holding, it will open a valve that will cause gas to flow over the pilot light and cause it to ignite. To see if your pilot light is functioning, there is usually a small window in the front of the water heater. If you can't see a flame, remove the access panel and see if that helps you locate it. If there is still no flame, you'll need to relight it in accordance with the manufacturer's instructions.



Your pilot light should burn with a bright blue flame. If not, make sure there are no drafts affecting it, which could keep it from functioning properly. If the flame looks yellow, it might be a sign of the presence of carbon monoxide, which spells trouble and needs to be looked at right away by a technician.


Gas Heater: Faulty Thermocouple


The second reason why a gas-powered water heater might fail is a faulty thermocouple. This is a small probe that should sit in the pilot light flame. Its purpose is to stop the flow of gas if it senses that the pilot light is out. Sometimes, these probes get knocked off track, so make sure it is directly in the flame. They can also get a buildup on them that prevents their function, so try cleaning yours off with some steel wool or fine-grit sandpaper. If your pilot light won't stay lit and you've tried these steps to fix the thermocouple, it is likely faulty and needs to be replaced. Call a technician.


Electric Heater: Breaker Blues


Electric water heaters don't have pilot lights, because there is no gas to burn in order to heat up the water. Instead, they do their magic through the use of (naturally) electricity. But that's not to say things can't go wrong with them. If your electric water heater isn't working properly, there's a good chance that a breaker was tripped that supplies the appliance power. Check your breaker box and flip any breakers that have switched to the off position back on. If it trips again, then there might be a fault in the water heater, and you'll want to call in a pro to have a look.


Electric Heater: Reaching The Limit


If the breaker is fine, check to see if the high-temperature limit has switched off on the water heater itself. To do so, first turn off the breaker to the unit. Then remove the service panel and press the red button you'll find there. This is the limit switch, and resetting it could solve your problem. To check, replace the panel, turn the breaker back on and listen to see if the water heater is functioning again.


Electric Heater: Heating Element


If these steps don't fix the issue, then you might have a failed heating element, which will need to be replaced. Unless you are comfortable with such repairs, calling in a technician might make the most sense.

https://www.homeserve.com/en-us/blog/home-improvement/no-water-heater/


Hot Water Heater Repair

I hope you enjoyed reading our article about How to Troubleshoot and Repair an Electric Water Heater. Thanks for spending some time to read our piece. For those who enjoyed our post kindly remember to pass it around. Kudos for your time. Don't hesitate to visit our site back soon.


Leaks? Ring us!

Report this page